The Balancer & Guard is fully featured and PULG & PLAY connection to Li-ploy
pack and works with any type of Li-polymer charger. It is also specially
designed with an advanced accurate micro-computer chip that scans each cells
condition and determines what the pack is needed for the best reconditioning. If
one or more cells are charged over 4.35 V, while charging, the Balancer-Guard
will cut off input charge circuitry and balance to prevent accidentally expose
while charging Li-polymer batteries. The Balancer Guard bypasses charge current
any cell(s) are over charged or imbalanced. It is truly associated with balancer
and safety charge guard system for the best safety for Li-poly battery. Please
read carefully to correct use.
Features :
○ Easy connection 2-5 cells in series pack
○ Operating with any Li-polymer charger
○ Automatically bypass charge current if any cell over charged or
imbalanced.
○ Individual cell LED display while bypass charge
○ Full balanced charge LED display(it can be monitor charger condition)
○ Operating form 2S to 5S Li-poly packs
○ Over charge warning LED display
○ Over charge protection circuitry
○ Error Connection warning.
Basic Specifications :
○ Input power: 50V max
○ Charge control current 6 Amps
○ Bypass Current: 300mA Max/ cell
○ Cell configuration: Auto cell detect in series
○ Balance control type: Active and shunt automatically control
○ Overcharge protection voltage: 4.35V +/- 0.01V
○ Protection release voltage: imbalance voltage lower than +/- 0.02V
○ Imbalance control: 0.01V
○ Full indicator: 4.18V/cell and imbalance 0.01V
NOTE: The device fits the, hyperion, polyquest & sky holic range of lipo batteries. If you wish to make it work with your battery then a conversion will need to be made.
|
Balancers 
